Quick Adjustable Cable Grippers Flexible Light Suspension Kit Cable Adjuster

Our grippers are available in a wide range of combinations for many lighting applications,

all grippers are precision engineered for safety. The grippers are compact and feature

outstanding design with an excellent plated finish. We supplies pre-packed component

sets for easy selection and quick installation. Individual grippers with wire rope to

order are also available on request.

Cable Grippers are used for easy, adjustable suspension on the go!

Just slide the gripper onto the cable and you’re set!

Description

What is A Gripper?

A Cable Gripper is an adjustable fastener that automatically grips and locks to any position on an aircraft cable using an internal, spring-loaded 3-ball gripping mechanism. This allows the Gripper to move freely up the cable but not down unless the mechanism is released.

What types of Cable Grippers are available?

There’s a wide variety, but there are two distinct types. The Straight-Thru’ or standard Gripper allows the cable to exit through the Gripper’s thread into the fixture. The Side-Cable-Exit Gripper allows the cable to exit the Gripper from the side of the body before the Gripper enters the fixture, eliminating the possibility of a short circuit.

If this is the first time you've worked with 3-ball aircraft cable compression system,

Please read the following carefully.

When feeding cable into the Gripper, always allow it to pass at least 1” beyond the body of the Gripper.

When cutting off excess cable always leave at least 1” of cable showing. Cables may be cut using purpose-built cutters. Cable will not fray unless passed repeatedly through the Gripper mechanism or otherwise abused. To prevent fraying of freshly cut ends, re-solder or apply a drop of super-glue.

Do not feed excess cable into a lighting fixture housing or junction box containing elctrical wiring.

Use only 7×7 or 7×19 uncoated galvanized or stainless steel aircraft cable.

When installing threaded Grippers DO NOT OVER-TORQUE THE THREADS.

Finger-tighten only and wrench-tighten a quarter turn further, but no more.

Grippers & couplers work best when cable follows their center line. Avoid angled pulls in excess of 5°.

For angled applications use one of our jointed grippers or our sloped ceiling couplers.

Jonwin Limited(Yingwei Lighting Accessory Co.,Ltd.) is a manufacturer that specialized in producing Hardware and Accessory for Lighting, Hanging System for Acoustic Panels, and Billboard.

Our products range includes Cable Grippers,Ceiling Attachments,Hooks,Standoff,Steel Wire,Swivels,Rocker Arm and suspension kits.

The factory is located in Dongguan,Guangdong,China,with 2,500 Square Meters production area and advanced manufacturing equipments, including CNC high precision automatic lathes, Table Lathes, Grinder and Polishing Machines, Automatic Polishers and Spray Equipments, as well as Die Casting Machine and Testing Machine.

With the experience of manufacture and sales for more than 10 years, Yingwei is growing up steadily and rapidly.

Our well-equipped facilities, excellent quality control, on-time delivery and good after sales service enable us to guarantee total customer satisfaction and expand the global sales network.

We are currently exporting our products mainly to USA,Canada,Japan,Russia,UK,France,Italy,Germany,Finland,Spain,Poland and other European Area.

With the growing demand from end users for reduced installation cost and increased flexibility, suspension kit and hanging system is becoming more and more important.

Cooperate with Yingwei, make the installation easy and flexible!